A.I.R. Question

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Vex
    Superiorly Inferior
    • Jun 2001
    • 1871
    #1

    A.I.R. Question

    The laser engraving on my Minimag's A.I.R. doesn't align perfectly anymore (I've replaced the parts in it a few times) It's only off my millimeters, but is this something I should be worried about? It doesn't seem to affect the reg at all. It really bugs the crap out of me though...

    "Otaeri wa doko desu ka?"
    ------------
    --Duct tape is like the Force. It has a light side, a dark side, and it holds the universe together.
    ------------
    Think you're ready, Grasshopper?
    www.ohioshaolin.com
    Tags: None
    • Autotrigger
      Registered User
      • Jan 2002
      • 342
      #2
      DOH!

      Does the valve leak between the halves when you line the words up? If not then line them up! If it does leak then try replacing the seal between the valve halves with one from AGD and not one of the 32* ones!
      AND ON THE 8TH DAY GOD CREATED THE AUTOMAG!!

        Comment

        • Vex
          Superiorly Inferior
          • Jun 2001
          • 1871
          #3
          I don't know if it leaks or not...I haven't played with it in the aligned position since the first time I changed out all of the seals and o-rings. If the engraving is aligned, then the two halves aren't tight, and I've been worried that damage might occur if they are left that way during play. I only use geniune AGD parts kits.

          "Otaeri wa doko desu ka?"
          ------------
          --Duct tape is like the Force. It has a light side, a dark side, and it holds the universe together.
          ------------
          Think you're ready, Grasshopper?
          www.ohioshaolin.com

            Comment

            • Autotrigger
              Registered User
              • Jan 2002
              • 342
              #4
              A.I.R. Alignment

              I have owned approx. 15 Mags and I have always aligned the Automag/Minimag engraving wether it was completely tight or not. No damage has ever occurred and I don't believe that anything could! Also, they have never leaked! I just snug the halves until the engraving lines up and leave alone. Try it and it won't drive you nuts anymore!
              AND ON THE 8TH DAY GOD CREATED THE AUTOMAG!!

                Comment

                • Vex
                  Superiorly Inferior
                  • Jun 2001
                  • 1871
                  #5
                  Thanks for the info. I can relax about it now...
                  "Otaeri wa doko desu ka?"
                  ------------
                  --Duct tape is like the Force. It has a light side, a dark side, and it holds the universe together.
                  ------------
                  Think you're ready, Grasshopper?
                  www.ohioshaolin.com

                    Comment

                    • Army
                      Moderator of DOOOOOOOOMMM!

                      • Oct 2000
                      • 5785
                      #6
                      It won't hurt anything, nor is it dangerous. The back half simply rotates a tiny bit, but the pin in the groove will stop it from going any further. It's totally normal.

                        Comment

                        • PyRo
                          President Bioloaf inc.
                          • Dec 2000
                          • 10186
                          #7
                          As long as you have the pin thing on the reg, you have nothing to worry about.

                            Comment

                            Previous template Next
                            Working...