main spring colors/differences ???

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • astr0xz0mbie
    Mag Addict
    • Mar 2013
    • 120

    #1

    main spring colors/differences ???

    what is the difference between the gold/red/and silver bolt springs ? do they make it easier on paint or adjust fps when shooting ? rookie question i know but i have been pondering this. can someone fill me in ? give me a detailed description of each springs purpose ?
    AO Feedback
  • nak81783
    Registered User
    • Nov 2001
    • 782

    #2
    This is the forum for trouble shooting your Airgun Designs products, including the Automag, RT, E-Mag, and WarpFeed. Also a great place to ask technical questions about non AGD products. An Airsmith's homeroom!
    Last of the Salzburg Clan

    Comment

    • astr0xz0mbie
      Mag Addict
      • Mar 2013
      • 120

      #3
      thanks !
      AO Feedback

      Comment

      • athomas
        Of course it works-its AGD
        • Jan 2002
        • 8039

        #4
        Gold is the standard short spring that works for all combinations plus lower velocity.

        The red spring is referred to as the middle spring. It is longer than the gold spring and is stiffer at the same amount of compression compared to the gold spring which makes the bolt softer on paint. Most of the time it can be used as is for good level 10 performance when operating at about 280fps.

        The silver spring is both longer and stiffer and can typically only be used if it is clipped on one end to allow it to be used within a usable velocity range.
        Except for the Automag in front, its usually the man behind the equipment that counts.

        Comment

        Working...