When To replace Bolt Spring...

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • HolySokz
    Registered User
    • Feb 2013
    • 26
    #1

    When To replace Bolt Spring...

    I've got a RT valve w/ lvl 7 and the bolt spring is prolly 1/4 below the tip of the bolt. IS it time to replace it?
    Tags: None
    • XtraKargo
      BPM AutoMagger
      • Apr 2013
      • 108
      #2
      My impression was as long as the spring was taller than the bolt, it was still good. Might be time to change it out.

        Comment

        • athomas
          Of course it works-its AGD
          • Jan 2002
          • 8039
          #3
          Yes, if the bolt spring is relaxed below the face of the bolt, it is definitely time to replace.

          The bolt spring is a consumable item. It should be replaced regularly as part of your general maintenance. You can generally tell when the bolt starts to get weak. You will start to get more incidents of short stroking on a level 7.
          Except for the Automag in front, its usually the man behind the equipment that counts.

            Comment

            • Ando
              Magusmaximus
              • Jun 2009
              • 4144
              #4
              Make sure you tag and save it as "worn spring". They're perfect for pump mags.
              My Feedback

                Comment

                Previous template Next
                Working...