I was bored and was cleaning my valve. I took out the on/off and gave it a wiping over like usual, and took out the little brass valve thingy under the on/off assembly. I went to put the on/off back im but forgot the little brass piece. I popped it in too far and now I can't get it back out!! Any ideas? I was going to try a magnet but it isn't magnetic. Or put glue on it, then pull it out but I am afraid I will mess it up. Help please!
-
"If everything is under control your not moving fast enough."
-
Using a paper clip with the tiniest of a sharp bend at one tip, insert through the hole and hook the bottom of it and slowly work it out.
The other way is to bang it against a piece of soft wood until it falls out. Just be careful you don't break anything else or scratch the snot out of it! Dave
-
Which hole? I will try the banging one...has this happened to anyone before? Lol...I am dumb."If everything is under control your not moving fast enough."
Comment
-
Freedom!! Woo hoo I got it out. I banged it against my hand really hard, it hurt but it's out! Thank you so much Army!!!!"If everything is under control your not moving fast enough."
Comment
-
If you put in the on/off pin with the bottom so you can't pull it out like Army said, stick a small metal rod through the hole from the back side of the valve body that leads to the top of the on/off and push down on it.Comment
-
if it happens again gas up the gun with the valve in. it will push that piece to the end of the valve whare it belongs.
then just take the valve out and remove that piece.
Sorry for the spelling. Im still working on it.Comment
-
Well I just banged it off my hand and it wedged outta there. I was getting worried at first."If everything is under control your not moving fast enough."
Comment
-
You best bet, it just gently prying it out with soemthing. Giving it a quick bust of air will shoot it out, that works too, just be sure not to shoot it somewhere that you won't be able to find it. Banging it works too. Try banging a valve from another gun like that, and tell me what happens See, mags are cool.
Comment
-
Mags are cool indeed. I didn't even have to use that much force, just little bangs and it came out nicely. How good is that? Mags rule...cockers, spyders, electros, etc etc drool
. I wouldn't use anything else but a mag.
"If everything is under control your not moving fast enough."
Comment
Comment