Shp asa

[2xFast]

Does anyone have a recommendation for an ASA to use with a super high pressure output tank? I'd like to use the POPs asa, but I'm not sure I can pull the macro line fitting and I'm nervous about the seals functioning with ~1100 psi.

[El Zilcho]

I use a SHP Reg/POPs ASA setup and have had no issues. I am not sure what you mean by "I'm not sure I can pull the macro line fitting"

[OPBN]

I run macro with my SHP reg and have no issues. Use the thicker walled macro and you should be fine.

[2xFast]

Seems like I should remove the mini macro line fitting and run a braided hose since macro line isn't rated for 1100 psi....I know it can be done, it's just not what I'd call reliable.

[2xFast]

Cool...that simplifies things I guess.

I run macro with my SHP reg and have no issues. Use the thicker walled macro and you should be fine.

[2xFast]

Plus....LIGHTER

[El Zilcho]

You can buy macroline, something like 3000 psi burst pressure I believe.

[astr0xz0mbie]

i use a cp mini direct mount asa and macroline and never had a problem and i run my ninja shp reg full bore 1100