I will try that as soon as I can get to the field to get some air and hopefully another tank to test with. Was going to go today but got called into work. I did call the field I was going to go to today and they said they didn't have a gauge that worked to measure the output on my tank, so I'm going to have to hope someone deciding to play the day I go to get air has one. I'm kind of wondering if I can't get a gauge if I could get a ballpark idea of the tanks output by just filling that tank, securing it and venting the valve at its max capacity and just notate the internal tank pressure when the airflow starts to drop off.
-
-
Went to the field today gassed up the mag and it shot fine. The only two things that were different was that I had the barrel installed and I only screwed the air tank in about 3/4ths as far as I could vs all the way as I had been doing. I'm glad that it was a fix that did not cost as much as a new reg. Apparently the field that I go to has had the same problem with a few of their rentals. Not sure why I had never heard of this type of problem until someone mentioned it here, but thanks a lot for the advice.Comment
Comment