POP ASA and Macro line

[chclax91]

Hi I have a NINJA SHP hpa tank thats putting out 1100psi (standard when bought) and Im looking to install a pops asa by PE and running it with a macro line. I see macro lines that the burst pressure is 3000psi. Will this work or will the macro line break/ the pops asa break o-rings? Has anyone done this while running 1100psi? All help/ information is welcomed. If you have pictures of other good looking asa for the ULE frame post pics. Thanks!

[Nobody]

I would not advise running macroline at input pressures above 1000psi. There is higher burst rated macroline, but steel braid line won't burst like macro. The fitting should be fine but anything can fail given enough stress.