AO: We are back from the dead... again! After an 18 day outage, we are finally alive and well. Who knew how complicated updating software/databases from 2008 would be. I still have alot of tweaks to make, but my main goal was getting everything patched and updated to 2026.
Vbulletin 6 has changed alot since 2008 so we will have a ton of new features to dig into.
Be a sceptic, but it works and the tape isn't visible because it is at the back of the barrel and inside the body. It has been a proven method for years. There is no other method of adjusting the detent farther into the barrel unless you weld a piece of plastic onto the back nub of the nubbin.
Since your using a gravity hopper, I would say your barrel is probably a large bore, as most twist lock barrels are, and todays paint is quite a bit smaller than it was years ago.
update
so today i shot the same brittle paint , with a new plastic detent ,with a small piece of electrical tape , and it was flawless
No breaks , no double and triple feeds ! and i haven't even installed the level 7 foamie bolt as it still has not arrived in mail yet
Thanks for posting the results. It helps others.
Comment