Recharge problem?

[BigFat]

I have a problem with my used Minimag that I just got. It has an ANS Phase II(this might be the problem), has the AIR valve, but I got the RT Benchy with it(weird set-up).

So the problem is, when I screw in the CO2, the thing in the RT Benchy that pushes back the trigger goes and pushes back the trigger(like it is supposed to) and then I pull the trigger. It shoots but it makes a weird "chuup" kinda sound. (This is w/o paint or a barrel.)

After that, the RT pusher backer thingy(whatever) doesn't go back again, and I pull the trigger and it seems like there isn't pressure or something. Nothing seems to be leaking, and my CO2 was just filled.

I'm kinda mad because I spent a bunch o' $$ on a Mini that doesn't work!

[HoppysMag]

bam theres your problem..

So the problem is, when I screw in the CO2,

CO2 is BAD!!!

also the ANS Phase II will do nothing the AIR cant. its bassicle worthless.

i dont know if it has anything to do with it but, does it need a spacer set. or is that for the RT.

[mwlildude2222]

you need to turn your velocity up, thats your problem, if its not your problem, then it is your spcaer kit, buy a new one, and put the smallest spacer in without it leaking, then try it again. If that doesn't work, contact one of the moderaors

[PyRo]

Ditch the PhaseII now. All it can do is mess up your gun.

[BigFat]

The velocity isn't the problem, I screwed it in an out so it was in a bunch of different places and it was the same. About getting rid of the Phase II, I would like to but you can't buy another back part of the valve(don't know the real name) from AGD, can you? If you can, how much does it cost?

[PyRo]

Do you have a retro valve that your trying to use Co2 and a PhaseII on?
I would say you probably need a new PT spacer. Shorter I believe, but not 100% sure. Could also be excessivly worn bolt/sear.

[BigFat]

No, it isn't a ReTro Valve, and the bolt and sear are fine. I might try a new PT spacer, but I'd have to buy the kit(dont have extras).

[BigFat]

up