-
-
just to be clear you want to mill an already annoed body so it can have the ace? or is it going to be annoed post milling? -
it is already annoed and the plan is to have it milled with no post milling ano. Since the miling to make place for the ACE would only have to be done on the top part (which sits flush to the body), the ano shouldn't get any visible damage/blemishes when the marker's assembled.Originally posted by captian pinky View PostComment
-
Any ULE Emag frame will have the milling and be the sameComment
-
unfortunately my Emag frame isn't a ULE...Originally posted by Tunaman View Post
are there specs/CAD files "just" for the ULE milling in that case?
Comment
-
I am not sure I would say that you don't have an X-mag. I am definitely not a Euro X expert but you may want to take a look at this:
Bunny could probably give the best history.
From what I gather the Euro X could have come with either standard or ULE lowers. I am not exactly sure what the ace harness looked like.
Either way I don't think you could truly convert standard lowers to ULE lowers with out having milling showing, rear hump, area in the trigger guard. If you just want an ACE slot than I get where you are coming from.
Do you have an ACE board to put in it?
Either way I think if you like the way it shoots than I would enjoy it, and if you really want ULE Lowers it may be worth asking if Caustic can match a frame.
Les see a picture of the gun
(PS I have never seen ULE Lowers CAD Files published)Comment
-
yes, I basically "just" want an ACE slot so that I can hook an ACE to the board...Originally posted by Mole1119 View PostI am not sure I would say that you don't have an X-mag. I am definitely not a Euro X expert but you may want to take a look at this:
Bunny could probably give the best history.
From what I gather the Euro X could have come with either standard or ULE lowers. I am not exactly sure what the ace harness looked like.
Either way I don't think you could truly convert standard lowers to ULE lowers with out having milling showing, rear hump, area in the trigger guard. If you just want an ACE slot than I get where you are coming from.
Do you have an ACE board to put in it?
Either way I think if you like the way it shoots than I would enjoy it, and if you really want ULE Lowers it may be worth asking if Caustic can match a frame.
Les see a picture of the gun
(PS I have never seen ULE Lowers CAD Files published)Comment
-
I would check with Luke or Xmagterror to see if they can do what you need.
Here are a couple old links that may be of use digging into deeper, the first one has some drawings, not sure the accuracy. Good luck
Comment
-
already on that path - thanks!Originally posted by Mole1119 View PostI would check with Luke or Xmagterror to see if they can do what you need.
Here are a couple old links that may be of use digging into deeper, the first one has some drawings, not sure the accuracy. Good luck
http://www.automags.org/forums/showt...il-ACE-milling
Comment
-
Comment
- AO: We are back from the dead... again! After an 18 day outage, we are finally alive and well. Who knew how complicated updating software/databases from 2008 would be. I still have alot of tweaks to make, but my main goal was getting everything patched and updated to 2026. Vbulletin 6 has changed alot since 2008 so we will have a ton of new features to dig into.
Comment