Will using a 12v REV hopper on a warp body cause ill effect

**PyRo** · 03-17-2002, 08:24 PM

Trial and error, go find out for yourself

**Predater** · 03-17-2002, 08:44 PM

i would think it would get nocked off easier.

**a_malfunction** · 03-17-2002, 10:42 PM

And the stack of balls you have is much shorter.... could cause chopping problems if you shoot too fast.

**zads27** · 03-18-2002, 06:00 AM

Well this was just to see how it would work, and theoretically a backup (although I do have a backup p/f mag..).

I have a Powerfeed Hopper Left E-mag body as well, but I have that on the backup p/f mag, but it's a hassle to change bodies (esp E-mag, cuz of sight rail)

If I really want to use my E-mag, but the elves steal my warp or blow it up or something, this is how I'd do it. Cut down elbow only for this body, blue bands are there just for my peace of mind and backup. It's pretty sturdy as shown in the pictures.

My results:
It's sturdy enough for play and such.
Due to the short ball stack, you cannot shoot a long string ( string > 4 balls ).
Hopper is almost like a centerfeed, low rise body.
Great in terms of balance, reminds me of the dark angel I traded for this E-mag.
Wouldn't use it as a primary setup, not as sturdy as regular hopper on regular p/f body (obviously)

**cphilip** · 03-18-2002, 08:04 AM

So lets hear some field reports on these then. I am curious.

**Tinsletown** · 03-18-2002, 12:52 PM

Thanks thus far

Thanks guys... Nice to know I bought a gun that holds a reputation for great owners, minus PyRo of course.

I am going to shoot another 200 or so balls through this config before I come back to the forum with an outcome.

**Manuel_FZR** · 04-07-2002, 04:08 PM

**Predater** · 04-07-2002, 04:32 PM

intellifeed works but with a long fast string i still out shoot the hopper.

Will using a 12v REV hopper on a warp body cause ill effect

Will using a 12v REV hopper on a warp body cause ill effect

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment