Hello all.
I have had some problems with my Emag...
The gun shoots fine in the semi-auto mode for all three settings (M, E, H). I do not shoot 6-shot bursts except for demonstration purposes. But there are no problems.
The 3-shot burst (in all three settings) causes problems. The first burst is fine. The first shot of the second burst is fine. Then a "phhht" sound comes out. Touch your bottom lip with your top row of teeth and blow out. Anyway, the second shot literally rolls out. And then the third shot "shotguns" out the end of the barrel or explodes in my powerfeed. This will repeat unless I do a very very thorough cleaning. If it is not cleaned well enough, nothing happens - the trigger clicks, but no bolt movement, no gassing sounds, etc...
I have talked to numerous people about this - AGD techs at tournaments, AGD tech support, field owners, even other Emag owners. Nobody has been able to give a good solution. I have sent my gun in for "repairs". I've had everything replaced at one time or another. Nothing has helped. I have been told to look for low flow? That seemed unlikely due to the specific settings in which the gun acts up.
Here is the specs of my setup for anybody who can help:
1. Emag, Warp Feed left
2. 114ci 4500psi adjustable N2 - I am sure the input pressure is 800psi - tank has been tested and tried
3. 12V revolution
4. all internals are stock
5. braided hose - NOT micro/macro line
Feel free to email me at [email protected] if you have any solutions. Thank you!!!
I have had some problems with my Emag...
The gun shoots fine in the semi-auto mode for all three settings (M, E, H). I do not shoot 6-shot bursts except for demonstration purposes. But there are no problems.
The 3-shot burst (in all three settings) causes problems. The first burst is fine. The first shot of the second burst is fine. Then a "phhht" sound comes out. Touch your bottom lip with your top row of teeth and blow out. Anyway, the second shot literally rolls out. And then the third shot "shotguns" out the end of the barrel or explodes in my powerfeed. This will repeat unless I do a very very thorough cleaning. If it is not cleaned well enough, nothing happens - the trigger clicks, but no bolt movement, no gassing sounds, etc...
I have talked to numerous people about this - AGD techs at tournaments, AGD tech support, field owners, even other Emag owners. Nobody has been able to give a good solution. I have sent my gun in for "repairs". I've had everything replaced at one time or another. Nothing has helped. I have been told to look for low flow? That seemed unlikely due to the specific settings in which the gun acts up.
Here is the specs of my setup for anybody who can help:
1. Emag, Warp Feed left
2. 114ci 4500psi adjustable N2 - I am sure the input pressure is 800psi - tank has been tested and tried
3. 12V revolution
4. all internals are stock
5. braided hose - NOT micro/macro line
Feel free to email me at [email protected] if you have any solutions. Thank you!!!
Comment