Ult in emag valve?

[justin82]

Is the ult that much better than the emag on off?its def not electro light but i dont find it that bad.. is it night and day difference trigger pull?

[nak81783]

Much lighter, but I short stroke them like crazy. I tried a ULT twice. Each time I went back to the RT on/off.

[justin82]

I suppose it is nice to have the trigger snap back with the rt eh,especially in the heat of battle

[nak81783]

Yes, and since they're typically not walkable (not that I can walk a trigger very well anyway), I don't find them any faster than the RT. Don't get me wrong, they're a great product. For me, I think it's the switching back and forth from electros to mech markers that prevents me from developing proper trigger discipline to take advantage of it.

[justin82]

Ive decided to stick with the stock on/off,figure il keep it simple..
Il update the post when my parts get here,hoping the carrier and quad ring will fix my issues

[justin82]

Update!!

Recieved my parts from tunaman

Replaced quad ring,put in a larger carrier and changed old gold spring for a new one.
NO leaks! No more sticking trigger and bolt, im happy☺
Thanks everyone and especially athomas and tunaman

[justin82]

Now to just make up my damn mind on anno

[athomas]

Thats a nice marker. A custom anno job will really make it stand out.

[justin82]

Athomas is it normal to once in awhile chuff while rting?like just slightly once or so dry firing almost 2000 psi

[justin82]

Il put the oil to it before next weekend,perhaps a couple rings are dry

[athomas]

As long as the orings are wet, they will be fine. They don't need much to work.

If you are RTing while shooting balls, a missfeed could cause a chuff, which is what the level 10 is designed for.

You shouldn't have any chuffs if dry firing unless you short stroke. Since you are relying on the bounce of the trigger on your finger, it is possible to short stroke. You want to have the on-off open as long as possible before your finger pulls the trigger again. A longer on-off open time means the chamber will have a better chance at being fully charged. Try adding a shim between your on-off halves. It will simulate a shorter on-off pin and help with recharge.

[justin82]

I will try that,it def does it in the first 1/8 of the trigger pull. I will get a video of it

[justin82]

Added the a level x shim between the on off it chuffed first pull then cycled perfect for 2000 psi rt and single pulls, may also be the brand new carrier o ring needs to break in a bit?
Put in the biggest carrier that doesnt leak

[athomas]

The level 10 oring will break in. The inner surface will smooth out.