Picked up a Retro Valve from AGD for my Mini and it won't work. I get back pressure on the trigger but when I pull it it doesn't release the bolt. I'm using a hopper right body and the stock grip that came with the Mini. I loosened the screw that holds the handle, frame and body together and loosened the valve screw that holds the valve to the frame and I was able to fire it. But it was very inconsistent in recharging the valve and sometimes wouldn't fire at all. I'm thinking that the body or frame is warped such that the valve is not seeted correctly within the body, however the old bolt and stock valve worked fine so this blows my theory out of the water. If this is the case I'll need a new frame and body. Anybody got advice for me? Thanks!
-
-
Hope this helps
From what I have read in other posts, it sounds like you need to order a different length on/off pin. You would need to buy a shorter one, since the one you have is too long and wont release the sear. Please remember that I am just speculating from information that I have gathered from other posts.:cool: :D AO member 4 life :cool: :D
-
Copy that. Thanks. I'll see if I can get a shorter pin ASAP and report my findings.Comment
Comment