Does anyone know a good way to make a pnuemag walkable. At the moment it will shoot but it's a little stiff. I have the pin hitting the very top of the lever of the msv-2. When I tested it before I installed it, it was very easy to walk but when installed it's a little on the stiff side and will not walk. This was my first pnuemag build so please be gentle on the replies! :) Oh and I have it in my RT ULE Xvalve with ULT installed if that helps. Thanks in advance yall!
-
-
From my understanding, you should not use a ULT trigger in a pneumag.
After that, adjust the LPR to get the trigger where you want it.
I could be wrong, but i am pretty sure that those are what you need to do. -
RT on/off with a .740 pin is what I have found to work best. The ULTs don't work will for this application because the return force is not great enough to return the ram piston reliably.
Also, if you are using anything other than a Palmers Micro Rock, you will have issues making it walkable.
Flipping the MSV2 helps a lot also. Search "Dirge Mod" here or on my site Bigevilonline to see what I am talking about.Comment
-
Comment
Comment