Need input from superbolt users

[TheMagMan]

Just tested the superbolt vs. stock bolt in my RT Pro.

Superbolt gave me 9 chops where the bolt cut the ball

Stock bolt gave me 0 chops

I used 1 full hopper for each test same bore paint out of the same bag, Superbolt (one of the very last ones sold before they went out of stock) Preset pure energy tank 68/3k full, 12v Revy

Nothing was changed other than the bolt/spring. I shot at a normal rapid rate of fire (slower than I normally would have)

I may be selling off my superbolt because a little less recoil is not worth all the cleaning / lost games.

Does the lightened bolt make it return/fire faster with the spring? Should the spring have a little more tension? I would think that the mere weight of the bolt would affect some type of timming when fired.

If anyone else can do this same test i'd be interested in hearing the results.

[TheMagMan]

Less then a case through it.

[LaW]

yours looks a lot more worn then mine does and I've had over 7 cases in mine.... I chop a lot more with the foamieless then the superbolt... in fact my superbolt has never broken a ball yet

[TheMagMan]

Maybe AGD changed the caseing during the last run of them.

[LaW]

I got one of the last new ones...

[TheMagMan]

I used a bit of hot water cleaning it just before the scan so that would make it look lighter in color and more used... it doesn't feel grooved like the picture shows. I think my scanner may be throwing it off as well.

[LaW]

yeah i noticed while washing it with water hot whatever it gets whiter and looks worn out...

[covadsucks]

Mine was an original and it great, but it's being retro fitted as I want to make sure it'll last. It was nice while I shot it. Kinda loud, but still very fast.

[Chupas2]

when you change bolts you need to change the velocity because it will jump up if you go from stock to super and the bolt hitting at a higher velocity might be what is causeing to ball breakage

[Tufiremn]

Originally posted by Chupas2
when you change bolts you need to change the velocity because it will jump up if you go from stock to super and the bolt hitting at a higher velocity might be what is causeing to ball breakage

Will the the velocity jump. I bought myself, and a buddy of mine super bolts. I shoot an RT Pro, and he shoots a Emag. With just putting in the Super bolt, and not messing with the velocity his went from 280fps, to 340fps. I turned my velocity down 1/4 turn before stepping up to the chrony, and I was still shooting over 300fps. As for the bolts, we both put around 3000 rounds (each) on them with no broken bolt, and no missing foamy.

[LaW]

every bolt seems to be breaking in the exactly same place... and those that are not are really the biggest key to what's up....

[Butterfingers]

Judging by the breakages, the superbolt is being crammed into the barrel stressing the delrin.

[Tufiremn]

Originally posted by Butterfingers
Judging by the breakages, the superbolt is being crammed into the barrel stressing the delrin.

Been thinking the same thing. Maybe Tom needs to find out what barrels are being used when the bolts break. I have seen a few broken ones on AO, and only once did the poster say what barrel he was using, and it was a Freak. Maybe too small of an insert, or there is a lip that the bolt is hitting. Maybe I'll make up a poll for this.

[LaW]

Well I'm using a freak and have had no problems through so many cases of paint. The bolt doesn't go far enough to hit the insert. There is another thread on here about superbolts that everyone should check out if they havn't already because someone made a very good point about how they could be breaking.

[anthraxxx]

On the off chance that you are not are you using plastic nubbins with the super bolt? This has more to do with scratching the bolt but wire nubbin might be cutting the balls as well.

Also since the bolt is lighter it would require less air to move it forward once it is released from the sear so that your which might be causing your bolt to break balls BUT I don't see why the velocity would change cause it your valve is regulated to whatever psi to fire your ball at 275 fps then the weight of your bolt shouldn't affect velocity right?