Cp reg question

[Abjay]

If i take all the internals out of my cp reg can i use it as a gas through grip?

[Nobody]

You can do that with any reg. As long as it still holds air, it will work.

[BiNumber3]

Most regs will have a small hole in them, over pressure exhaust port? If you pull all internals out, that hole might need to be plugged, either with an internal sleeve or a set screw.

[captian pinky]

Most regs will have a small hole in them, over pressure exhaust port? If you pull all internals out, that hole might need to be plugged, either with an internal sleeve or a set screw.

if it is the 3 piece cp reg i think the top and bottom have the same threads and can be screwed together with out leaking.

[paint magnet]

Yes, but why wouldn't you sell the reg and buy a used gasthru for ten bucks? CP makes good regs but that's an expensive foregrip.

[Abjay]

I want to keep the cp reg to use on my other guns but the cp reg is much smaller than the gas thru grip that i have. The macro lines fit perfect with a cp reg on it. And it makes the gun feel much smaller.

[Abjay]

Captian pinky was right the top and botom fit togethet with no leaks. It shortens it up even more. Works perfect!