mag problem

[Adrenaline666]

hey,
my mag's trigger is pressurized, but wont shoot. whats wrong?

[Mag89]

Do you have air in your tank also is your sear in right?

[The Mad Painter]

possibly your tank doesnt have full presure. this allows the click when it cocks, but nothing else to happen. you get a "feel" in the trigger, but no shooting. also, check your reg. if its out and not allowing enough air through, it wont really cock, and therefore not shoot. try cranking it in a few times, then repressurizing. if your luck is running bad and that doesnt help, your sear may be to short. 9 outta 10 times, you wont have enough air pressure, or your reg is set to low. but in some cases, the trigger rod has broken the loctite and jiggled outta alignment. make sure you know what you're doing if you have to touch the rod length, it has to be proper or you'll damage your sear, bolt, and on/off. not good. hope its just an air problem. good luck!