AGD Warp question.

[The Mag Man]

My friends are intersted in getting a Warp. One has a vert feed Piranha and the other has a vert feed Autococker. Now will the less exspensive AGD Warp fit these guns? I know they will need the 90* adapter, does this come with the AGD Warp? Or will they have to buy the Proteam Warp which by the way seems way to much in price. Thanks in advance.

[headcase]

I don't think the current AGD Warp comes with the adapter. TK said a while back that the company that was suppling them stopped making them or something.

Yes while the PTP kit is more expensive it does come with the two piece mounting bracket and the aluminum 90 adapter. I beleve the added adjustability of the two piece mount, and the better quality 90 adapter(over the plastic one that AGD used to supply with there warp) is work the added price.

FYI - PTP charges around 40 dollars for the bracket and 45 for the 90 adapter if you by them seperatly.

[The Mag Man]

Still looking for answers:

Will the AGD Warp fit their guns without the 90* adapter? And what is the difference between the AGD bracket and the PTP one? And why doesn't AGD just make the darn adapter themselves? You'd think they would seeing how its a preety important piece!

[BlackVCG]

All you need to fit a Warp on any vertical feed gun is an AGD Warp with the plastic 90* adapter. Just dremel off the clamp part of the adapter so it's completely round and then you can press it into the vertical feed cup.

If the gun has a vertical feed that takes an adapter, you can probably just clamp the 90* adapter for the Warp onto the feed neck (like the SFL). If the gun has a removable vertical feed adapter, you can probably get it machined so you can clamp the adapter onto it instead of cutting off the clamp on the adapter so you can fit it in the vertical feed cup.

The PTP Warp has a more adjustable bracket with a vib sensor inside of it. The AGD bracket is one piece and works fine on most all guns.

[The Mag Man]

Thanks.

[headcase]

Originally posted by The Mag Man
Still looking for answers:

Will the AGD Warp fit their guns without the 90* adapter? And what is the difference between the AGD bracket and the PTP one? And why doesn't AGD just make the darn adapter themselves? You'd think they would seeing how its a preety important piece!

Yes the AGD warp will fit their own markers without the adapter, or at least the power and warpfeed ones.

Black covered the difference in the brackets.

From what I understand about AGD they don't make alot of parts in house, most of the pieces that go into their products are made else were and assembled by AGD. If I'm wrong here please correct me, but that is what I get from watching the supertour videos.

Also, again correct me if I'm wrong, while Black is correct about moding the plastic 90 to work with vert feed markers, I don't think that AGD is putting the adapters back with their warps yet.

[BlackVCG]

Right on all points Headcase.

[headcase]

See it does happen every once in a while.