Anyone still modding barrels for Centerfeed?

[PaintballSmurf13]

Hi all,

I searched the forums for anyone offering this and only turned up posts 5+ years old.
What I have are two NIB Dye Barrels, an Aluminum and SS that I'd love to get working with a CF Twistlock body, namely the lo rise.

Thanks

[vintage]

if you're wanting the depression for the twistlock pin i think most people do it themselves these days. all you have to do is drill a small dimple for the pin to catch on.

[PaintballSmurf13]

Sounds easy enough. Thanks.

[Tunaman]

Sounds easy enough. Thanks.

1/8" mill end bit to do it right. The hole should have a flat bottom