Are Warps good to go out of box?

[Kaiser Bob]

Anybody know enough about brushless motors to answer my question?

[superccs]

that IS Wierd

what are you gonna use it for?
i put mine right below my hopper...
that way no one sees it

[BlackVCG]

The old Warps came with a 6V adapter that held 4 AA's. The deal is, nobody really used them because they wanted the faster spin from using 9V's, so AGD stopped including them with the Warp. You can go to Radio Shack and find the EXACT same adapter for a couple bucks.

[RT 01037]

hey superccs

can i see another two pics of your gun maybe one from the side and one from behind?

[jimmyjobob]

warp

worked great right out of the box. love it. had to tap new holes on the warp bracket to suit my needs. also did the two 9v mod to mine, very easy, very cheap. and you can turn if off. can also run on one 9v if need be.

scroll down to
"This is what you need to install two 9V batteries for longer run time"

http://www.pettypb.com/timiwarp.html

[The Mag Man]

How do I get the Warp hose into the Warp?

I tried to do this and the hose wouldnt fit in, AND NEITHER WOULD MY REVOLUTION! Do I have to use some muscle to get the hose in or what? And why does the Warp not come with an extra adapter for Revs? They are the most popular loader!

[jimmyjobob]

The Mag Man

whoa. there is a hose adapter that goes into the warp first. your revo does fit.
if you look at your warp with the screwedin plate on the right...

your hose to gun goes up front and your revy goes in back. i had to sand the warp adapter a little to fit.

[The Mag Man]

My Rev does not fit! And if you had to sand the adapter to fit into the Warp then thats a load of horse crap. AGD should have made the thing to fit the product they made it for.

[RATM]

Maybe he got a bad apple. Mine fit together with no problems at all.

[The Mag Man]

I'm not saying mine doesnt fit together, just that my Revlution doesnt fit into the Warp. It looks like I will have to take so electrical tape around the Rev's neck to make it a tight fit. Thats retarded! It should fit in there, and if they didn't make it Rev size, then they need to have an adapter that comes with the darn thing for the Rev!

[BlackVCG]

If they're not fitting because it's too tight, then you need to loosen the Warp housing screws and then retighten then once you get everything positioned.

The Revy being too loose is the way it is because BE screwed up the Revy. They made the neck smaller to fit their cheap elbows they include with their guns so now there's no standard on neck size. AGD kept the 1" neck size hole for old Revys and if BE every gets it together again to make it the way it use to be. It's better to have a larger hole for the Revy than too small of one. On the smaller neck Revys you can get a hopper neck spreader or just use electrical tape.

[The Mag Man]

Wow BE really sucks. Thanks for the info Black.

[The Mag Man]

How would I go about oiling up the wheels?

[max-mag]

stupid BE, why do they have to be so rich as to buy JT and viewloader? and why did those selfish businessmen taket the offer from BE? The only product of brass eagle that is their O-rings, and even they fail sometimes!!! by the way, how fast will a wapr feed consistently as in there would never be any gap in the paintballs if you free-fed them? and is it true that if you buy more hose for the warp that your batteries are gonna run out faster because the wheels have more weight to push?

[max-mag]

sorry, 4got to add this for "mag-man"

if your revvy is too loose, then what you do, is get an O-ring (preferably BE) and cut it in half, then stick it in between the crack where the to half-shells come together at the neck. hope it helps