I have a Mini with the black teflon finish and a vertical feed and a bottom line adapter. I have never seen this model until I got my hands on it. Does anyone know if it will at problem mounting a Warp Feed because of these characteristics of my Mini ?
-
Right on to the real.
Death to the fakers. -
Minimag body
Most of the warp set-ups that I have seen have been with either a regular powerfeed body or a warp body. I have never seen a centerfeed with one, but I suppose with the proper elbow you could attach the warp hose to the feed tube!AND ON THE 8TH DAY GOD CREATED THE AUTOMAG!! -
Got a pic? I would like to see it...MM19223 -=Minimag=-
[Level-10]&[ULT]
-Self Polished Body
-Intelliframe nickel
-Lapco SS 12 inch
-KAPP Chrome gas thru-grip
-32* Flame Drop Chrome
-Black Macro
-47ci 3000psi Crossfire tank
My minimag-link working
email: [email protected]
aim SN: drx975Comment
-
You can put a warp on a centerfeed, you just need teh 90 degree adapter, and maybie some other piece.
Comment
-
No pic just yet. I am also curious about your air, I also have a crossfire 4500psi and it is fixed for 725-750 have you had any probs with it blowing discs ? I also use a 3000psi tank with no probs. The only barrel I have found is the J&J ceramic that came with it. I use a AA that is hoopty dremelled to accomidate the certerfeedRight on to the real.
Death to the fakers.Comment
-
you just need the 90 adapter and they now come with the new warpsTEAM Island Assault
Vapor Bushmaster - Green
J & J Ceramic Barrel
Warp Feed
No matter how many times you polish a turd,it's still just a piece of crap.Comment
-
Ok nevermind the pic, 888-paintball sent me a little AD thing and I saw the automag/minimag that you are talking about; vented, black, centerfeed, no vert adapter. In fact it was like an hour after I posted that I saw it. Anyway, I have not gotton the god damn chance to use my Crossfire yet for several reasons, one being very bad luck(im playing thursday or monday after easter, so i will let you know). Also, teh crossfires are set to 800-850psi, are you sure yours is really in the 700's? I find that hard to believe, but even if it is, that shouldnt really do anything to the blow-out disks, I think.MM19223 -=Minimag=-
[Level-10]&[ULT]
-Self Polished Body
-Intelliframe nickel
-Lapco SS 12 inch
-KAPP Chrome gas thru-grip
-32* Flame Drop Chrome
-Black Macro
-47ci 3000psi Crossfire tank
My minimag-link working
email: [email protected]
aim SN: drx975Comment
-
Not to be like a broken record, but:
It'll work with a 90 degree adaptor.
It'll work with a 90 degree adaptor.
It'll work with a 90 degree adaptor.
It'll work with a 90 degree adaptor.
It'll work with a 90 degree adaptor.
It'll work with a 90 degree adaptor.
3-D Pong's bro!
Originally posted by Restola
Why can't I just be in charge of the world?
Captain, Tremor Comment
-
crossfire
drx 975
Here's the deal about the crossfire tanks according to the techs. The tanks marked with 701 on the neck of the valve were faulty in manufacturing, the drill that makes a hole from the fill nipple to the blowout wasn't complete therefore back pressure will blow the disc. I am sure it is 725-750 and I had absolutely no prob with it. Beside the defective valve which Crossfire is fixing as we speak. Oh yeah how about that 90 degree elbow.Right on to the real.
Death to the fakers.Comment
Comment