leaking gun

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jah871
    Warp Effect
    • May 2001
    • 2228

    #1

    leaking gun

    when i gas up my gun it leaks.i cant tell where its coming from sounds like from the barrel any help would be apreciated
    Email [email protected] AIM Adio755
    The PB Trading List
  • Cha0tic
    g0t mag?
    • Feb 2001
    • 1990

    #2
    if the leak is coming from your barrel, it is one of the o-rings in your powertube. press the trigger down and hold it, does the leak stop? if so it is definetly your powertube. if it keeps leaking while you ar eholding the trigger down, it is one of your on/off o-rings. hope that helps.

    you might want to purchase the automags instructional video, it tells how to fix everything. call AGD and you can probably get one for free.

    Comment

    • jah871
      Warp Effect
      • May 2001
      • 2228

      #3
      it stops leaking after i hold down the trigger. it takes mabe 10 secs though. is it just the oring below the powertube spacer?
      Email [email protected] AIM Adio755
      The PB Trading List

      Comment

      • Cha0tic
        g0t mag?
        • Feb 2001
        • 1990

        #4
        try replacing your powertube o-ring. i don't like the sound of that on/off though. if it takes that long to seal, you might want to buy a parts kit and replace the on/off o-rings too.

        Comment

        • jah871
          Warp Effect
          • May 2001
          • 2228

          #5
          i just put a parts kit in it. i dont know if i put somthin in wrong or what. should i just replace the powertube oring and on off>?
          Email [email protected] AIM Adio755
          The PB Trading List

          Comment

          • Cha0tic
            g0t mag?
            • Feb 2001
            • 1990

            #6
            first try the powertube o-ring. if that doesn't work, replace the on/off o-rings as well.

            pulling the trigger seals off the front section of the gun. if air is still getting through, the o-rings are not sealing properly. just little FYI

            Comment

            • jah871
              Warp Effect
              • May 2001
              • 2228

              #7
              ok thanks
              Email [email protected] AIM Adio755
              The PB Trading List

              Comment

              Working...