-
-
If I remember correctly, whether classic or rt/x valve there is 450psi in the dump chamber. When firing the the gun, the sear unhooks the bolt, the power tube releases the the air in such a way that actually uses 90 psi to fire when using level 7. With level 10, that is brought down to about 65 psi.
Sent from my SM-G975U using Tapatalk -
Interesting. Thanks for the info. That would make it softer on paint than most modern guns!Comment
-
Now that I think about it that tracks. Recently I was shooting some garbage white box Valken paint that was exploding every other shot through my DM Matrix. When I switched to my Level 10 RT Minimag the problem went away. The Matrix operating pressure is somewhere around 135psi and that was too much for that paint.Comment
-
In my opinion, the problem stems from the paint being too damn brittle along with being smaller than before.
Sent from my SM-G975U using TapatalkComment
- AO: We are back from the dead... again! After an 18 day outage, we are finally alive and well. Who knew how complicated updating software/databases from 2008 would be. I still have alot of tweaks to make, but my main goal was getting everything patched and updated to 2026. Vbulletin 6 has changed alot since 2008 so we will have a ton of new features to dig into.
Comment