Air leaking out the side of valve

[criticalhammer]

Air has started leaking out the side of my X-Valve. Took it apart, cleaned every contact surface and its still slightly leaking out the hole on the side. I'm guessing there is an o-ring that needs to be replaced, so which one?

[luke]

Replace the reg pin orings

[captian pinky]

Also make sure you do not have any lint or foreign debris on them when reinstalling.

[Tunaman]

And make sure you check the for snug fit on the other end of the pin before you use them.

[criticalhammer]

Whats the procedure to remove those two? Of all the orings replaced those where the two that I could never figure out without damaging something.

[luke]

Remove the c clip on the end of the pin or just use a pick and pull it over the clip, the middle plastic spacer has a split in it to make it easy to remove..

[Tunaman]

You dont have to take any clip off. Take the orings and spacer off with a pick and reassemble.