Tac One Help

[Metafauna]

Hi everyone. Brand new here.

I recently acquired a Tac One, it's my first Automag. When I gas it up, the bolt comes forward about 1/3 into the breach and air just pours out the barrel. I'm using a 68/4500 infamous tank with a counterpunch regulator set to 450psi. Any ideas what could be causing this? Thanks in advance.

[going_home]

Output PSI for Automags should be 7-800 on your tank, 450 is too low..

The reg on your tank is likely the problem.

[Metafauna]

Output PSI for Automags should be 7-800 on your tank, 450 is too low..

The reg on your tank is likely the problem.

Thanks! I hooked up an 800psi tank and it works like a charm.