i think im gonna try and make a superbolt of my own. couple questions. 1) is it just a stock automag bolt? i will turn it down some on a lathe to accept the delrin sleeve. and how thick is the sleeve on the superbolt? another thing can you buy the replacement sleeves yet?
-
-
Yea, you can buy the replacement sleeves(that is actually a HARD word to spell...) at the AGD online store.
3-D Pong's bro!
Originally posted by Restola
Why can't I just be in charge of the world?
Captain, Tremor -
The back section of it is the same as a stock bolt. I think the plunger is drilled out to save wieght, and i'm not sure on the derlin sleeve thickness. If you buy the replacement sleeve, then you can just make your bolt the same diamiter as the inside of the sleeve. Its probably not going to be an easy thing to do, espeically without all the measurements, but I guess it is possible. Good luck if you decided to go ahead with it.
Comment
-
you guys know where i can get a stock bolt for pretty cheap new or used? oh yeah i changed my user name to this one. used to be 311automag.led matrix.Comment
Comment