Proper adapter ball stack?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • The Mag Man
    Proud Automag owner.
    • Nov 2001
    • 295
    #1

    Proper adapter ball stack?

    This post concerns a post made by RobAGD, http://www.automags.org/forums/showt...hreadid=12140. How is it possible to obtain the "good" setup of the stack? I tried for a half hour messing with the PF plug length and the position of the 90* adapter itself. Nothing worked at all, it just staying the same each time. That post didnt give very good instruction so on how to obtain this setup either. Has anybody actually done it? Cause I sure can't.
    Tags: None
    • The Mag Man
      Proud Automag owner.
      • Nov 2001
      • 295
      #2
      Up!

        Comment

        • BlackVCG
          Grubby Owner

          • Oct 2000
          • 4956
          #3
          How is your gun setup? A picture would help. To adjust how the balls are positioned in the 90 adapter, you adjust the position of the entire unit. Moving it up and down on the feed tube or up and down in the vertical feed cup. Depends on what gun it's on. Just prime the system and then move the adapter up and down to change how the balls are positioned in the 90 adapter.
          My Feedback

            Comment

            • The Mag Man
              Proud Automag owner.
              • Nov 2001
              • 295
              #4
              My Warp setup looks exactly like this, except my house is a little bit longer.

                Comment

                Previous template Next
                Working...