Klak!!! Hisssss!!!

[FiTiRPiLiT]

i was messing with adjusting my trigger on my emag. all good, i went to put it all back together and gassed up and that's what i heard. it was as though the valve in the gun was constantly open. umm.....gunga, i guess i won't be making you scream like a girl tomorrow after all if i can't figure it out! please advise

[slayer]

I think that when you put the gun back together it has to be in manual mode with the safety off. Don't quote me on it, though but I had strange problems about the gun not working when I put it togeter, but now it works :) so I don't worry.

[FiTiRPiLiT]

still no good. anyone have a clue why? did it royally screw it up?

[Blennidae]

How full is your tank? Maybe not enough of an initial burst to seal it up?

[FiTiRPiLiT]

about 1600psi, low, but i think it's probably enough

[FiTiRPiLiT]

geez....i turn the on/off so it went full on and it was a LOUD hiss for about 6 seconds before i shut it off, and now i'm down to 1200 psi......WOW!

[Blennidae]

Maybe try holding the bolt back while turning it on, then seeing if it still leaks?

[Eric_AGD]

Make sure the bolt is in the gun.
Make sure the sear axel pin is installed.
Make sure power tube oring is there.

[FiTiRPiLiT]

bolt....check
sear pin.....check
power tube o-ring???? sorry i'm an idiot.

[Gunga]

Originally posted by FiTiRPiLiT
sorry i'm an idiot.

I've been telling you that forever!!

[hitech]

Does it do this if you gas it up in manual mode?

The power tube oring is in the tube that the bolt sits "on". You access it by using a coin to unscrew the brass tip. Inside is the power tube spacer and an oring.

[pumpamatic]

I don't know much about Emag's, but in the Automag tech video, Tom said to hold the trigger down as you gas up, it's supposed to seal everything better. Other than that try everything people have said, and it would be more helpful if you told us where the leak was coming from.

[Magic37220]

I dunno much about emags, but in my mag, something like that has happened. The problem endedup being that the on/off pin was in backward. See if it works.

[FiTiRPiLiT]

thanks for all your help guys...i went ot airgun and gunga took care of me....he's such a swell guy.