AO: We are back from the dead... again! After an 18 day outage, we are finally alive and well. Who knew how complicated updating software/databases from 2008 would be. I still have alot of tweaks to make, but my main goal was getting everything patched and updated to 2026.
Vbulletin 6 has changed alot since 2008 so we will have a ton of new features to dig into.
ok there is something wrong going on with my mag. it is starting to shootdown after my first shot!!!! please people tell me whats wrong and how i can fix it!!!
thanks
2k1 Silver LCD Angel
14" Smart Parts AA
68/3k Crossfire
Kapp Dropzone
www.xpb.us
best site ever!!!!
Strip the gun down, take apart the on/off assembly carefully. As you are pulling it out, take the brass thing and turn it upside-down, and put the gun back together. I know it looks identical on both sides, but it isnt. (btw ppl, i heard they fixed this, but i have a level 7 minimag and it did it to me) When it happened to me, I was on the field and shot one ball and it went 20ft so I was like wtf and shot one more and it went at 400fps and shot amazingly straight. By then I knew the exact problem cause i read it somewhere. Try this cause if you turn the brass part over, you can always just turn it back over if it doesnt work. Just be careful you dont drop the damn thing on the floor, I did once and I almost screamed cause you have to gas the gun up go out and shoot to see if its right-side up or not.
edit: if this doesnt work, something might be restricting the air from entering the gun. Dont ask me what, just check.
MM19223 -=Minimag=-
[Level-10]&[ULT]
-Self Polished Body
-Intelliframe nickel
-Lapco SS 12 inch
-KAPP Chrome gas thru-grip
-32* Flame Drop Chrome
-Black Macro
-47ci 3000psi Crossfire tank My minimag-link working
Comment