Ok. when I hook my mag up to air, it is ok then after you pull the trigger a few times the air leaks out. Sometimes it stops but usually it just keeps leaking. If I remove the air and put it back on I can fire a few more shots before it whacks out again. Any ideas? I just replaced all the o-rings
-
-
Out of the barrel? If so, try a longer powertube spacer.-Gig 'Em Ags! -
oil the hell outa it, most of the time too much oil will solve leakage problems, if that doesnt work you might need to get a power tube spacer kit.If your body is really wierd, try showing it to people in the streets for money.-Hitchhikers Guide to the Galaxy, Tips for aliens in New York, SurvivingComment
-
Umm you don't want to overoil your mag, it will start getting all over the barrel and ruining your barrel. If you follow the proper steps to oiling your mag you will be okay.
Well if it's down the barrel try different spacers and replace the power tube oring."If everything is under control your not moving fast enough."
Comment
-
i dry fire my mag without the barrel about 20 times before i call it good, sorry, shoulda slapped that into my last post.If your body is really wierd, try showing it to people in the streets for money.-Hitchhikers Guide to the Galaxy, Tips for aliens in New York, SurvivingComment
-
ummmmm.....that's not a very good thing to do to ur mag. not only is it messy, but you can mess it up pretty bad. Just follow the directions for oiling it. If it's still leaking, try the "spacer kit" thing. if it's STILL leaking, try replacing o-rings. course, the problem depends on if ur shooting nirto, ca, or co2. if c02, it could be something else (freezing, bolt lock, icey valve, etc.....)Originally posted by xatle
oil the hell outa it....
Good Luck!
______________
CAN YOU TASTE MY PAINT?Comment
Comment