Ok I was cleaning my gun yesterday, and I noticed that my bolt spring is about 3/16" from the edge of the bolt (front edge, part that hits the ball). I also noticed my powertube o-ring is brownish. Should either of these be replaced? Also, what are some bad things about having a weak spring? (just so I know if I need to go buy a parts kit or not)
-
MM19223 -=Minimag=-
[Level-10]&[ULT]
-Self Polished Body
-Intelliframe nickel
-Lapco SS 12 inch
-KAPP Chrome gas thru-grip
-32* Flame Drop Chrome
-Black Macro
-47ci 3000psi Crossfire tank
My minimag-link working
email: [email protected]
aim SN: drx975 -
first off, you should always have a parts kit handy. i myself have atleast 3 layin' around somewhere, the difficult part is finding them. he he.
the spring should be just breaking the plane of the tip of the bolt. as long as it goes past the bolt tip it's fine, although there is a specific length that is ideal, don't believe it makes too much of a difference though.
as for the o-ring, i don't think being brownish should be a problem, i know mine is. if you start to have a problem with the powertube and then the powertube o-ring should be the first thing you go for. other than that, no worries"To serve to strive and not to yield"
--------------------------------------
I AM THE PURPLE PEOPLE EATER! -
If your 'Mag is working fine, I wouldn't change anything. As for having a weak bolt spring, it could make the bolt spring bottom out, and then maybe have wear on the bolt, but I am not sure.
3-D Pong's bro!
Originally posted by Restola
Why can't I just be in charge of the world?
Captain, Tremor Comment
Comment