HELP!? MINIMAG spews CO2 out barrel?!

[la690]

i just bought a minimag used... but the valve sticks open i think causing it to shoot 1 1/2 times and chopps paint. as the bolt starts to freeze over all the way it doesnt shoot at all and just pukes air on the barrel. can ant one help me at all?
thank
PPS

[PyRo]

The co2 is freezing the gun. You need an antispyphon tank, x-chamber, remote, stabalizer, or any combination of those (exept antisyphon and remote, that will make it worse).

[la690]

ill try what i can...

i have an X-chamber i could make my tank anti-syphon. i have heard that it is not a good idea to put a 2nd reg on a mag is that true? i see that it does it really bad when i put the barrel to the ground and shoot, thats how i knew there was a problem with liquid getting into the gun. is there ant thing else i can do to the gun itself to help solve the problem more? it does it even right when i put the tank on and shoot 10 times, i cant even play a game with it.

thanks -pps

[a_malfunction]

You probably know this, but your best bet is HPA.

[la690]

i know, i wish i could use my HPA tanks

i had an Automag RT but had to get rid of it b/c i couldnt use CO2... its sorta hard to come by convieniently out here in the counrty at a rec place...
Whould a power tube spacer kit help any?
thanks

[nw2c2003]

Since you must run co2 I would suggest the anti siphon tube along with a palmer stabalizer. I know several people who do this and it seems to work well for them.