call it a barrel extension. and it absorbs the gas to give it more accuracy. if anyone asks that is.
-
Your Immortal Until You Die -
First off, you never know who you are going to run into at a walk-on game, so I would be careful in taking that to your local field. Second, a silencer wont render the gun as silent as you may be hoping for. Noise comes out the feed tube as well, unless you want to put a pillow over your power feed. :)Quote of the year: "Reading blwos"
As little as 10 cents a day and you can buy my family out of slavery... Hurry before its too late!
Comment
-
nooo call it a paper weight!! I mean they call brass nuckles and stuff like that a paper weight.. soo why not a silencer aka paper weightComment
-
I was bent on making a silencer once.. I diddnt do it though.
Instructions:
Grab a PVC tube that fits over your barrel.
Drill holes in it.
Grab ABS tube that is bigger in diamater than the PVC.
Wrap the small PVC in Wire Mesh, and wrap anything soft, like soft foam, something that is sound absorbant, around the PVC, on top of the Wire mesh (the wire keeps the soft stuff from getting in the porting) Then slip the ABS on top.
Get some end caps and drill a hole in each cap, so the hole lines up with the PVC opening. Slip the caps on top of the ABS, and your done.
I guess its not the best way, but of well.Comment
Comment