Retro Valve Upgrade

[FrAuStY]

I was interested in upgrading my factory Automag 68 valve and reg for the retro-valve. I have some questions though concerning parts I have purchased for the current setup. I bought the ANS-phase two valve (Back half of the assembly) and the phase two venturi bolt. Would the bolt work on the retro-valve setup? Also there's probably no need to swap them but would the phase two valve work on the retro as well? I would appreciate any help you could give. If these parts won't work.. I'll have to find someone to buy them before I can go with the retro.

Hey!! Angel guy!! HOW MANY TIMES PER SECOND YOU GONNA MISS ME TODAY?!

[toymyster]

The bolt will work, but the reg will not!! The only problem you will have with the bolt is that it will wear out a lot quicker than the stock RT bolt!!!

[PyRo]

You do not want that bolt on your retro. Stick with the stock bolt. Not only will it last longer, and prevent leaks from out of tolerance parts, but it will help you feed faster and prevent some chops because of the extended nose desing.

[Havoc_online]

I've been running my retro valve with a 32* mag foamie bolt ever since I got it, with no problems.