Drop forwards/Cradles

[FrAuStY]

I was just curious what drop forwards and cradles would actually work with the Flatline 68/3k tank and regulator. I checked out Kapp's Dropzone 2 and it looked like it'd work but I don't want to spend 50$ if its not going to work. I thought I saw a mag with this DZ2 and what looked to be a Flatline nitro but the pic was so dark I couldn't be sure. I kinda wish the dropforward on the flatline was about 1.5" longer and about .5" lower. Are there any others out the besides the DZ2 that will work? Thanks for your input peeps

[krafty]

You can buy this dovetail adapter from AGD...

http://store.airgun.com/acb/showdetl.cfm?&DID=17&Product_ID=156&CATID=3

...and then you can use any d/f you want that accepts a dovetail.

[FrAuStY]

I appreciate the link and the thought...but I really have my heart set on the DZ2. I think I'm gonna go ahead and get it and if it doesn't work..I'm sure someone would buy it at a field lol. If anyone else knows or has seen a Dropzone II cradle on a Flatline system please let me know.. Keep on slapping.

[MikeCouves]

You can clamp the DZ onto the silver part of the tank. The silver part is behind the reg but infront of the tank, know what I mean? Then you run the hose to your valve or whatever you have.

[FrAuStY]

Ok... I've asked..and no one can give me a yes or no answer...here's my deal.. take a look at this pic..

Drop zone II on a flatline tank

Is that or is that not a KAPP dropzone II cradle on a flatline tank system? I don't know who's RT that is..but I need to know if there were any mods done to make it work? 55$ is a lot to just toss out if it doesn't work right.. Please someone if you know that it'll work with no drilling or honing let me know por favor!!