if i get a nice regulator for my mag could i turn down the operating pressure to around 200 psi or would this not work? thanks
-
Black Teflon Eclipse Bonzia Green p/f mag
Bonzia Green splash 14in. AA
Intelliframe w/ intellifeed
Custom Drop
68ci 3000psi stubby
9v revvy
AGD Fomie
Someday:
Retrovalve
Warp feed
"So son, when are you gonna be done buyin stuff for that paintball gun?" "Done, haha done, yea right" -
well, the mag need somwhere around 350? to run at. this means it should be higher than that. you should put air in your gun at about 800-850psi.
200 would not work lol
-
Operating pressure
The operating pressure of Co2 at 70 degrees is 850psi -or+
PrezentsComment
-
Any lower that 600psi or so going into the AIR valve will probably starve the gun and cause shoot-down at any more than a few balls a second. T
here is no need for more than two regulators on your mag. One on the air source giving 600-900psi input to the AIR valve and one in the AIR valve giving a 450 or so opperating pressure."Relax. Don't worry. Have a Home Brew."
-Charlie Papazian
Feedback: http://www.automags.org/forums/showt...threadid=40134Comment
Comment