Trigger frames

[Ryderdude15]

Hey guys, I have a mag with a benchy double trigger frame for my mag and i've noticed there's a lot of play in the trigger after the gun's been fired. i was wondering if like a dye or kapp trigger frame would be better then a benchy. like i noticed on the stock frame after the guns fired you pretty much cant pull the trigger back n e further... can n e one help me out and tell me which frame has the least play in the trigger and stuff? thanks
Erick

[Tunaman]

The best frame out is the AGD intelliframe. Next is the Dye. Forget the Kapp or any others.

[FrAuStY]

Some benchmarks (I don't know about the mag frame) have a pre-tapped hole for a 1/8" set screw. You can thread one thats about 3/16" long into that hole (it may need to be longer or shorter I don't know..you'll have to try it out yourself). If it doesn't have one and you feel comfortable ... you can drill and tap your own set screw. With that you can back it out or screw it in until your trigger stops right after it shoots... eliminating trigger slack. Hope this helps..

[Autotrigger]

Trigger Frames

tunamans right, the Intelliframe is the best! The DYE is also excellant! Even the stock trigger frame is better then some of the "other" so called high performance 2X trigger frames! The Z-Grip is also an excellant choice!

I have never seen a Benchmark with a factory trigger adjustment! Even if they do exist the side to side slop is more then reason enough not to use one!