HELP i want a minimag but need HELP

[Mgwannabie]

ok i want to get a minimag but dont kno much about the gunos if u can help me with these ??s that whould be great

i would like to get a 67ci/3000psi tank but need to conserve money what brand should i get? micr lines and braded lines whitch better? on the mini there is a thing that goes down were u can put the tank in right, now what kinda expantion camber should i get? do i need one? and does the line have to go through the thing that goes down is there a hole or somthing? what kind of stuff do i need to buy to put the air throught the bottom? like what do i need? also i want to have a stock with remote for the air is that possible? does the mini come with a barrrel? is there a good site were i can get all this stuff?



thanx

[Mgwannabie]

also can i put a warp feed on it?

[T1StandrdKink]

If you get a nitro tank you wont need a expansion chamber ,but if you want something to hold on to you could use a gas thru foregrip. You could use either macro line or steel braided hose, it really dosent matter much. You can run a stock with a remote ,and a warpfeed too.

[Quiet]

In order more or less

Pure Energy tanks and Crossfires are cheap.
Braided lines are better than micro.
Verticle ASA.
Don't need if your going HPA.
Remote can go right to the ASA.
Do come with barrel I believe.
[email protected]

[Quiet]

Warps were invented by the same person who invented the Mini
Of course it fits

Get the Mini, you'll love it

[Sparky5472]

Yes the mini comes with a 8" barrel, not a very quiet one but it does the job until you get a new one.

[BIGJON]

ok

well...ive got a minimag. the gun come stock with a very small very crapy 8 inch barrel. it comes with a q/d steel hose running from the reg to a vertical adapter. from the vertical adapter you will want to buy a gas through foregrip(not x chamber...x chamber makes nitro suck)...then from the gas through foregrip connect a hose from it to a asa(thing the tank screws intro on bottom of grip frame.)you will have to buy the asa also. i would definatly run nitro...for a newer mag owner/player i would recomend a pmi pure energy 68/3000. there reliable get good shots and there cheap. you can find all thee products and more at these websites

https://www.countypaintball.com

https://www.paintball-online.com

https://www.paintballondemand.com

https://www.888paintball.com

i hope this helps.