Wierd paint breaking issue

[BlueMagRT]

i have a warp fed RT with a warp body. when i have paint in the hopper and the warp the gun shoots great with no breaks. if i place on ball in the breech and fire the ball will break every time.

i am using pmi advantage with a stainless foamie bolt.

[FrAuStY]

Are you using plastic nubbins or a wire nubbin? If you've got a wire one... bend it out of the barrel a little bit to lessen the tension. This should keep you from breaking it with just one ball in the breech. Now it may be setup that stiff since you have the warp feed. (If it were less it may allow the warp to feed extra paint into the barrel since the nubbin could hold them back) I don't know. I don't use a warp.. but I know when my mag did the same thing yours is doing..it was the nubbin. I held the paint about 1/16" out of the load hole in the barrel which was just enough for the bolt to smack into it and break it. Lemme know what happens. BTW.. question bout your mag.. do you like that CP barrel on the mag? I have one for a spyder..I had no problems with it.. I was just curious how the mag performs with one. PEEAASH (peace)