AGD Intelleframe....

[Armegeddon]

Few questions for you intelleframe owners/geurus

1) What exactly does it do?

2) What is the difference between the blade and groove
style?

3) Are they really worth the money? Or should I just stick
with my benchy 2X?

Any help is greatly appreciated

[FrAuStY]

The intelliframe was made by AGD so it will not affect the functionality of your marker like the benchmark may have. It allows you to attach a micro switch inside the grip to intellifeed your hopper (Agitates on every trigger pull regardless if theres an empty spot in the load tube. It's pre-drilled and has a bracket made into the fame to mount switch. For about 140$ you'll have everything you need.Also since its longer than your single trigger it allows for a lighter trigger pull which inturn can help with a higher rate of fire. I get about 7-8 bps with sometimes 9-10 on a burst over a chrono.

-switch
-Screws/nuts to mount switch (I bought mine at hardware store 35 cents for both screws and nuts)
-wires needed

Other than that theres an instruction set on Airgun.com.
Intellifeed you revvy

The blade trigger is just like a long tooth or blade have you. It allows you to pick your own comfortable place on the trigger.
The 2x trigger is like any other.. I don't personally like them since it has two pre-defined trigger shoes (places for your fingers) The blade allows you to fire anywhere on it..comfortably.

I'd sell your benchy and buy an intelli!!