RT Bumper question

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • gimp
    Registered User
    • Jan 2001
    • 2368
    #1

    RT Bumper question

    Well, I havn't played for a while, and I'm gonna be playing pretty soon. After inspection of my marker, I noticed one thing that could pose a problem. The Bumper (the flat o-ring in between the bolt and the valve) is worn. Right in the center of the o-ring, it's worn, so It's not tight against the powertube, it's a little loose. I don't have any air so I can't try it out. Do you guys think this will be a problem? I could order another one, but I want to wait till the 90degree warp feed adapters are in.

    Thanks!
    Tags: None
    • hitech
      Not a shedder of vortices
      • Nov 2001
      • 4775
      #2
      It is just there to keep from haveing metal to metal contact between the bolt and the valve body. If it appears to be capable of keeping that from happening I wouldn't worry about it, for now. I would replace it when I had the chance.


      Hey Hitech your starting to sound like me! - AGD
      Hitech is the man.... :eek: - Blennidae
      The only Hitech Lubricant

        Comment

        • BlackVCG
          Grubby Owner

          • Oct 2000
          • 4956
          #3
          As long as it's on the valve and not completely cracked in half, it's fine.
          My Feedback

            Comment

            • Shockerman
              Team Tucanes / T-Force
              • Apr 2002
              • 4
              #4
              Your fine until it has enough slack to get stuck by the bolt traveling backwards, then your in trouble.
              You can get a new one in a Parts Kit.
              Hope this helps...
              Keep it simple, play fair!

                Comment

                Previous template Next
                Working...