okay i have a proteamproducts micro emag and itts leakin like an sob down the barrel anyway ive checked all the orings i know about and can seem to figure it out any help would be appreciated thank you
-
Some say a New gun is beauty, i say a old gun that works great is perfection. -
It might be a worn out bolt. Or the powertube spacers.set up: Micro e-mag with 32 degree chrome flame drop, Level 10, 88/4500 crossfire, 12 in CP, 32 degree whisper and ARADUS 14in barrel, EVO II.
Stare at Mr. Humpey!!Stare at Mr. Humpey!!
-
Probably the spacers. Get a kit and put a smaller one in. Also, check to make sure the field strip screw is in tight.-Gig 'Em Ags!Comment
-
Since the Micro E-Mag uses the Retro Valve, it has the common problem that the Retro Valve has of leaking down the barrel if not gassed up quick enough. Hold down on the bolt with a straight shot squeegee or something similar when you gas up the gun. It also helps to have the valve well oiled.Comment
Comment