cleaning more than playing!!!!!!!

[e9mm]

I have a new RT Pro center feed........Before I even played I got a Freak System and A 10-Hole bolt....My Air system is set to 750psi and i can fire two, sometimes even 5 or 6 at a rapid rate but,the next single shoot might break...don't know if I'am chopping paint or if I'am sizing my Freak wrong.
I Got this gun because of it's rep. on how fast it was and other thing's.I HOPE IT'S SOMETHING STUPID.
AGD is sending me free Plastic nubbins..
Does anyone else have any answers???????

Team Jolly Rogers
Tony

[Paintballer86]

IT is prolly your aftermarket bolt. Just try shooting the gun with the stock bolt, and you will be suprised how well it preforms

[speedballbanks]

Originally posted by Paintballer86
IT is prolly your aftermarket bolt. Just try shooting the gun with the stock bolt, and you will be suprised how well it preforms

i think this might be a stereotype because i use a phase 2 bolt and have nothing but good things to say about them i think the problem here is that he just got the gun and he still is shortstroking the gun i mean we all know that term and i think that is what might be his problem cause personally i like those bolt's better and they seem to be the slightest bit lighter.

EDIT: shortstroking if you might not now is when you don't fully go back and forth with the trigger.

[Paintballer86]

Originally posted by speedballbanks


i think this might be a stereotype because i use a phase 2 bolt and have nothing but good things to say about them i think the problem here is that he just got the gun and he still is shortstroking the gun i mean we all know that term and i think that is what might be his problem cause personally i like those bolt's better and they seem to be the slightest bit lighter.

EDIT: shortstroking if you might not now is when you don't fully go back and forth with the trigger.

I totally agree, I think it might be a sterio type. Now that I think about it, I think you might be short-stroking it.

[virus]

well... he is saying that after 5 or 6 shots, the next on might break..... to me that sounds like a feed problem.... in other words his hopper is not keepin up... granted if the hopper is keeping up then it could be a short stroke.... or even both....

but i'm puttin my money on the hopper not keepin up with maybe a touch of blowback.... hence why i never cared much for centerfeeds.... unless there is a warp attached to it =)

[banzaimf]

check out the stack height of the balls. I bet you will find a 5 or 6 ball stack from the bottom of the barrel to the bottom if the revvy. I would also guess you have an older revvy that does not have the x-board in it.

I am having a similar problem with my micro e

banzaimf

[a_malfunction]

Try the extended foamie bolt. IMO, they are the best bolts you can get for a mag.

[e9mm]

cleaning more than playing!!!!!!!

I have a new Ricochet 2k Hopper........Does this help...

[a_malfunction]

Well, is the hopper working correctly? I've never used one, but I hear that they feed fairly quickly. It should be enough to feed your gun. To be sure, try another hopper like a revvy or a Halo.