Mag Down... Need HELP!!!!!!!!!!!!!!!!!1

[veritas]

Ok here it is...

I have a 6 month old 68 Automag...Dye ultralight barrel, 9v revvie, 68/4500 pure energy preset...

And i'm not sure which power feed plug i have...and i have the long nose foamieless...


First if i pull the trigger very slowly i get a slight hiss of gas leak and then it goes away as i fully squeeze the trigger..If i pull it normally, it sounds like right before every shot a hint of gas is escaping but i can't tell...it just doesn't sound right...If i fully pull the trigger and hold it...no leak whatsoever...and no leak with the tirgger at rest...just when i begin to pull it...


Second...i will be firing at a regular rate... and all of a sudden i will pull off a shot and nothing will come out...like u didn't have your revvie on and the balls were not feeding except whn i turn the gun to the side and shoot it looks like the power feed is jamming up the flow of paint...when the power feed is turned in and the gun is feeding paint there appears to be a fraction of a "lip" between where the bridge of the powerfeed meets the body and as the paint is being forced through, it is catching that little lip and it won't feed into the chamber...


I have never had problems with my mag before so thses to are firsts...

Pleas help...is something wrong with my valve...?, do i need a new power feed plug...?Do i have the old one...?

Any info would be appreciated...?


Veritas

[virus]

the leakin sound is normal.... just gotta pull the trigger quicker....

look on the p/f plug where you grip it.... it should have 2 little holes on the bottom of it... if not then it is an old style... if it does make sure that it is in all the way and aligned up right.... if the lip is still there i belive you just need to take an hex wrench to adjust it....

[veritas]

Is there a pic of this...not sure what u mean...?I think i just fixed the leak...stripped the gun down...added a little lube and re gassed the gun...seems to be fine...but just plain weird...

[veritas]

Here are some pics...maybe this will help figure out the mystery...

My PF plug...

[veritas]

and again...

No need for 3 pics of a PF plug.

[veritas]

And...yet again...

No need for 3 pics of a PF plug.

[Paintballer86]

Yeah, you have the old style Power feed plug. Call agd or write them at [email protected] and ask for a new one. Thay are free.

[veritas]

Okdokie...will call on monday and get the new plug...hope this solves the problem......

[speedballbanks]

hmmmmm i have never heof that loea being normal my cousins mag does that i think your on/off o-ring might need replacing and keep oil running through your gun but that is deffinitely not normal change all of he o-rings and it shall work better ha your not pulling fast enough lmao.