How do you remove a stuck/froze barrel???

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Rebellion
    Registered User
    • May 2002
    • 12
    #1

    How do you remove a stuck/froze barrel???

    Bought a Automag RT off eBay and unfortunately the sale didn't include the instructions / owners manual. Nothing is covered in the onLINE manual at the official WEBsite.
    I pushed the barrel in what I thought was all the way in and twisted to lock it in. Unfortunately it wasn't all the way and now I can't remove it. . . ..any suggestions????
    Tags: None
    • Potatoboy
      Hamburgers should be high

      • Sep 2001
      • 2533
      #2
      If you look in front of the trigger there is a screw, try loosening that a little bit and see if that helps. If not report back.
      Potatoboy!

        Comment

        • Krazy Ivan
          I don't do Anno,
          • May 2001
          • 600
          #3
          If you disassemble the gun the barrel should be able to be slid out. Remove the screw that holds the grip to the rail with an allen wrench, then remove the thumb screw in the back and it should all come apart.
          Once you have shot and eliminated someone, you have established your position towards them. In a sense, the next move is up to them...

          See ya in the dead box!

            Comment

            • Rebellion
              Registered User
              • May 2002
              • 12
              #4
              No Dice.
              The barrel seems like it's stuck on something, I can turn the barrel - pull - then it gets stuck.
              I've removed the screw in front of the trigger and still have the same results

                Comment

                • Krazy Ivan
                  I don't do Anno,
                  • May 2001
                  • 600
                  #5
                  Can you see in the breech? will it turn so that balls can feed? if not you inserted it the wrong way. I know because I've done it b4. I got mine out with a lot of muscle, wouldn't recommend but it will work..
                  Once you have shot and eliminated someone, you have established your position towards them. In a sense, the next move is up to them...

                  See ya in the dead box!

                    Comment

                    • Dubstar112
                      Dubstar111x
                      • Feb 2001
                      • 2321
                      #6
                      You might have turned the barrel too far and had the breech area lock in the twist lock assembly. Take the whole gun apart and try removing.
                      AO #765
                      CCM Series 5
                      Prerelease Impulse
                      Hyperframed Warped Mag w/flatline tank
                      Feedback.

                      Good to know that somone of Tom's status seeks "relief" from a sport he helped create. A sport now ruled by a single patent.

                        Comment

                        • Rebellion
                          Registered User
                          • May 2002
                          • 12
                          #7
                          Thanx for all the help.
                          I figured out the problem [atleast for now]. I removed the trigger frame and found on the body the brass cylinder [ located next to the screw closest to the trigger ] with the set screw. I backed the set screw all the way out and removed what looked like a spring and PRESTO the barrel slid right out. The feed port in the barrel was damaged from me tugging and twisting on it. Thats cool, the guy I bought it from on eBay gave me extra barrels.
                          Once again I want to thank all who contributed to my post - glad I bought a Mag.

                            Comment

                            • TransMan
                              Man Beast!!!
                              • Apr 2002
                              • 3152
                              #8
                              u want to keep that spring in there just dont screw it in all the way

                                Comment

                                • Rebellion
                                  Registered User
                                  • May 2002
                                  • 12
                                  #9
                                  LoL
                                  I made sure to replace all the items I removed. All reassembled and working fine. Well, more than fine - looks like I'll be going through paint like nobodies business.

                                    Comment

                                    Previous template Next
                                    Working...