Automag level 7 trigger adjusment ?

[Challe]

Hello , i am buying me self a used automag level 7, the only problems with it is :

- The trigger has wrong setup.

- It needs to drink some oil

The trigger is now so that i cant even shoot away a ball , so i am wondering how to setup the trigger and the length etc etc so it works.
Is it easy ? and is it easy to lubricate the parts.

sorry for my bad english iam a swede.

[FrAuStY]

When you gas up the gun,measure between the trigger and the trigger rod. There should be 1/16 of an inch (I understand you use metric, sorry I'm too lazy to convert it). Then fire the gun and hold the trigger back. There should be 1/16 of an inch gap between trgger and trigger frame. Hope this helps. you should probably visit www.airgun.com and go to the tech support link. Then you'll have a manual to go by when diagnosing problems

[Challe]

thx very mutch

[a_malfunction]

As long as there is a gap when the gun is gassed up, you're good. And as for lubing the gun, all you have to do is take some paintball gun oil, put a few drops in the ASA, gas it up, and shoot it a few times. That gets oil to all the parts that need it.