Differences between the 68 automag p/f and the minimag

[Barrakuda <>-<]

Hey, I need some help... Is the 68 automag classic p/f the same as a Minimag Hopper Right Black Paintball Gun?? I know that the minimag looks cooler, but besides that is there anything different? Is one easier to upgrade than the other, what? Thanks for any help!

[TheTramp]

The only real dfference is that the Mini comes with a vertical adaptor. There might be a difference in the valve waranty but the valve it self is exactly the same. All upgrades will fit on one will fit on the other.

[Barrakuda <>-<]

Thanks... I was wondering where I can find the stuff to get the p/f automag working... Like where can I get a vert adapter, foregrip or x-chamber, and anything else that I need to get one of these guns to work... Also what barrel would you prefer, do they make the bigshot for it, let me know... thanks.

[blackmag3]

the first thing i would get would be compressed air. you can get a crossfire 47 3000 for about 60-70. co2 will work but not as well and will require things such as an expansion chamber or regulator , and a remote or anti siphon tube for your co2 tank. just dont use an anti-siphon tube with a remote because then your sucking liquid co2 into the mags valve which they absolutely hate. also get a parts kit. barrel wise a freak system would my choice. a motorized loader helps a lot. as for where to buy things check out www.paintballgear.com . they have cheap prices and i've never had a problem with ordering from them as long as they have what you want in stock. and welcome to the mag family.

[Barrakuda <>-<]

Well, I know NOTHING about mags but I heard they are great... Can you please link me to the exact page for what I would need to get the automag to function? That would be great and I would appreciate it greatly... And I'm kind of low on funds so can you tell me a barrel for around $50.00 thanks...

[blackmag3]

copy and paste www.paintballgear.com . as for a $50 barrel i like my teardrop barrel from smart parts. considering the price. for $50 there should be lots of barrel choices

[Barrakuda <>-<]

Yo, I know websites where to buy stuff... I'm asking what do I NEED TO BUY TO MAKE THE AUTOMAG FUNCTION? because I see there is nowhere to screw in the CO2 or Nitro... This is where I need help!

[blackmag3]

you need a bottomline. look at the sites you know of and get one. also gonna need hose of some sort and fittings

[paint magnet]

If you're referring to the Automag classic, then you will either need to run a remote straight to the valve, get a vert. adapter, get a bottomline, or get a backbottle kit. J&J barrels are nice and cheap too, about $40.