AO: We are back from the dead... again! After an 18 day outage, we are finally alive and well. Who knew how complicated updating software/databases from 2008 would be. I still have alot of tweaks to make, but my main goal was getting everything patched and updated to 2026.
Vbulletin 6 has changed alot since 2008 so we will have a ton of new features to dig into.
I had that problem, Pull the bolt off take the power tub tip off and the spacer off, do you see the oring behind the spacer? If not check inside the chamber with a flash light. It should be there. yank it out check for damage if there is replace.
For some odd reason that oring sucked into my air chamber.. real pain in the ***, couldn't figure out why it was leaking so bad.
Magnum, I'm so happy you said that. I have a leak I've been trying to figure out where it is for 2 days now! I'm replaced almost every oring and oiled up...still leaking! I'm going to go check!
Thanks guys. That was the problem. The O ring that goes beneath the spacer in the power tube tip was missing. I replaced it and all is well. Thanks for the help.
Comment