2 problems with my mag

[paintballrulzs]

The warp feed while i was trying to set the spin started to make a humming noise and won't spin.

My other problem is with my hyperframe. Every few shots the on/off pin just shoots down into thr frame.

How do i fix these problems!!!

[Phil]

Sounds like there is nothing wrong with your mag.

[paintballrulzs]

Well when the warp makes the humming it won't feed. When the on/off pin drops the gun won't fire

[Blazingace]

Haven't seen a warp up close, but it sounds like the motor is jammed and trying to spin. Electric motors will hum loadly if they are trying to turn but can't. As for the Hyperframe question, doesn't the sear hold the pin in? I don't know how the Hyper works, but the sear should keep it from blowing out? Right?

[Hacker240]

i Suggest sending your gun in. Always helpss it seems to be extremely messed up.

[Blazingace]

Forgot one thing. Try you 'mag with the stock grip and grip frame on it. If you don't lose the on/off pin you may have problem with your hyper. just a suggestion.

[Jonno06]

ok,i THINK you have lost your lil nob piece that holds the sear in place.....

[BlackVCG]

If the Warp won't spin but the motor spins, take the back plate off and you'll either see that the belt is broken or not connected to the pulley on the motor. Fix accordingly.

Are you using the Hyperframe on/off pin? Try it with the stock on/off assembly and see how it works.

[MrMag]

so u r missing the sear pin? u can buy those for 3.00 on the agd store

[paintballrulzs]

I give up on the warp. You will soon see it in the classifieds